L4 G11 Mount The Wilcox L4 G11 Non-Breakaway Mount with Horn Interface Shoe allows firm attachment of the AN/PVS-7B/D and AN/PVS-14 Arm to a variety of combat helmets when attached to a Wilcox One-Hole HMI, Three-Hole HMI, or the standard Army Shroud. The NVG mounting system prevents breakaway of the mount, thereby reducing risk of loss of the NVG.
What’s nice about this mount is that the release for the J arm is different than the Norotos mount. This keeps you from inadvarently hitting the release on the J arm when you reach up to pull down your helmet mount. That means it’s less of a chance for your PVS14 to drop to the ground! Also this mount offers a lot more adjustment than many other models and since Wilcox Engineering made it, it is tough as nails!
- Dimensions (operational) 4.65″ L x 2.58″ W x 3.80″ H
- Weight (G11 Mount Only) .40 lb. (6.35 oz.)
- Material Construction: Light Weight, Aerospace Grade Metal
- Accommodates NVG AN/PVS-7B/D, AN-PVS-14
- Vertical Height Adjustment: .90″ Total Travel
- Fore/Aft Travel: 1.60″ Total Travel
- Tilt to Horizon: 12 Above, 5 Below
- Flip: 110°
Export of Wilcox Industries products is controlled by the U.S. Department of Commerce under Export Administration Regulations (EAR) and the U.S. Department of State, Directorate of Defense Trade Controls Bureau of Political-Military Affairs, in accordance with 22 U.S.C. 2778-2780 of the Arms Export Control Act (AECA) and the International Traffic in Arms Regulations (ITAR). (22 CFR Parts 120-130) regulate Wilcox products.
It is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or within the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.