Product Description
65 foot Whisper Guyed Tower Kit for Whisper 100/200 (H40/H80) wind turbines. Does not include pipe and anchors.
Southwest Windpower Whisper Tower – 65 Feet Guyed Tower Kits for the Whisper 100 & 200 |
|||||||||||||||||||||||||||||||||||||||||||||
|
Part | Quantity | Part | Quantity |
Tower Base | 1 | 3/8” Carriage Bolts | 8 |
Upper Guy Wire Set | 1 | Tower Insert (included w/turbine) | 1 |
3rd Guy Wire Set | 1 | Pivot Bolt and Nut | 2 |
2nd Guy Wire Set | 1 | Pear Connecting Link | 1 |
Lower Guy Wire Set | 1 | Tower Base Coupler | 1 |
3/8” x 2” Bolts | 18 | Gin Base Coupler | 1 |
3/8” x 3 ½” Bolts | 6 | Gin Pole Top Piece | 1 |
3/8” Lock-nuts | 32 | 4 link Chain | 1 |
Cable Thimbles | 18 | Straight Connecting Link | 1 |
Cable Clamps | 54 | Gin Pole Coupler | 1 |
Note: Kit Contents may change without notice.
65′ Tower Kit Components
Necessary items not included in this kit:
Anchors
Tubing or Pipe for Tower
Ground Rod and Clamp
Lightning Arrestor*
Electrical Wire
Wire Connectors (preferably copper split bolts)
Pipe Insulation (to prevent wire “rattle” inside pole) *
Electrical tape or heat shrink tubing
Lifting Cable or Rope (2,000 lb. (950 kg.) strength x 150 ft. (45m))
Vehicle or Winch*Optional items
Specifications
- Pole Lengths: 3×15′, 1×20′
- Gin Pole: 26′
- Guy Radius: 33′
- Auger Size: 60″ (not included)
- Anchor Hole: 2′ diameter x 3′ deep x 12″ concrete
Pipe Requirements
Tower Kits use 2.5″ CQ40 fence pipe (available from any chain link fence company) or 2.5″ schedule 40 water pipe (fence & water pipe actual outer diameter is 2.875″). For detailed assembly instructions, see the Tower Manual in PDF format below.
Raising the tower with a gin pole, wind generator in place
Watch the video! “How to Raise the Wind Turbine”
Reviews
There are no reviews yet.