|SOLAR ONE BENEFITS|
2100 80%-deep cycles over 10-year warranted service life means more cycles and usable battery capacity in Renewable Energy service.
10 year warranty: . It is the original and still the Best Warranty in the Renewable Energy industry and it just got even better, 7 years free replacement, 3 years prorated
Slightly enlarged epoxy coated steel case enables each battery cell to be removed for Easy On-Site assembly.
A Lifetime jar-to-cover heat seal Guarantee is possible due to the “welding” of the cell jar to the cell top.
Lead plated copper intercell connectors with stainless steel connecting hardware are included with every Solar-One to ensure Maximum Energy Transfer, reduce corrosion and maintenance.
Free shipping in continental United States adds even More Value to the Solar-One.
ISO-9000 Certified manufacturing plants and process assures you of batteries made to the high international Quality standards.
Solar-One uses a special patented recipe to achieve Even More Extra Life at deeper cycles than the competition.
Solar-One uses flip top caps that Reduce Maintenance time.
Solar-One is available in 8 sizes which reduces, or in many cases eliminates Unnecessary Paralleling.
|Solar-One is the only battery in RE that has over 9 sq. in. of terminal area that allows for Multiple Connections to the battery without the need for expensive terminal blocks.|
Solar-One batteries have been in RE service for over 10 years yielding an extremely good track record with less than a 1% Cell Failure rate.
The Design Advantages Are Built-Into every Solar-One with Hup Technology!
Take a look inside:
| Here you will find information pertaining to all flooded (not sealed or gelled) Lead-Acid Batteries. |
The graph below pertains to batteries that have a fully charged Specific Gravity of 1.280. Graphs for other batteries will appear different.
| Cycles To 80% DOD 2100 Over 10 Years|
Estimated cycles to 50% DOD 4000
Battery Type Flooded Lead-Acid
Positive Plate Tetrafluoroethylene (Teflon®) /Lead Antimony
Post-to-Cover Seal Burned Post to Cover
Cell “Jar” Material Injection Molded Polypropylene
Cell Cover Material Polypropylene
Can Material Epoxy Coated Steel
Intercell Connectors Lead-Plated Copper Rated @ 700 Amps
Specific Gravity @ 77°F 1.280 +/- 5 points 100% Charged 1.160 80% Discharged
|* The Charging System includes all charging sources|
Shipping Dimensions: All pallets are approximately 40” wide X 48” long. No more than two 12 volt batteries will be shipped per pallet. The overall height when on a pallet is approximately 29.75”.
Shipping Weight: Add approximately 50 lbs for 12 and 24 volt orders and 100 lbs for 48 volt orders
Solar-One OUR PRICEs
FREE SHIPPING IN THE LOWER 48!!!
Most models ship within two business days from order
|Bellow are guidelines for maintenance of the SOLAR-ONE Battery. Your previous knowledge of lead acid batteries may not require this much attention, but remember, the more interaction you have with the battery (The Heart of the system) the better service life you can expect from your investment.|
The Solar-One warranty as it pertains to records, only requires that "reasonable records be kept". Use your best judgment.
1. Record hydrometer reading of pilot cell (the cell with the lowest specific gravity when you first received the battery. Once a year select a different cell to be the pilot cell)
2. Check the water level of all cells (add as needed.) Use ONLY DISTILLED WATER! Using tap or well water will void your warranty.
3. Record Amp/Hrs consumed.
4. Inspect connections for corrosion (clean as needed.)
Bi-Monthly (Every other month)
1. Record hydrometer readings of all cells (after the battery is fully charged.)
A. If the average readings are less than 1.275 – 1.285 check all charging sources and adjust as needed.
B. If one or two cells read 20 points more or less than the average, circle those readings and check for improvement at next monthly reading. If the low cells do not improve, the cells are in need of an equalize charge, specific gravity adjustment or internal inspection.
2. Check water level (add as needed.) Use ONLY DISTILLED WATER! Using tap or well water will void your warranty.
3. Record Amp/hrs consumed.
4. Record battery temperature.
5. Clean battery with a damp cloth. (If battery tops are wet with acid, use neutralizing agent with a clean paint brush, rinse and dry thoroughly.)
6. Equalize the battery
7. Inspect connections for corrosion (clean as needed)