Product Description
Permanent Magnet DC Generators
443540 Permanent Magnet DC Generator
- Magnets: Two high-energy saturated C8 ceramic magnets.
- Shaft: Steel 8mm (5/16″) diameter, 38mm length, with 1mm full-length flat.
- Armature: 16-slot armature 52mm diameter would with AWG25 magnet wire (fusing current:24 amps).
- Brushes: Extra-long 8x14mm brush assemblies including spring, pigtail, and cap – replacement stock no. 443729
- Bearings: Two double-sealed 32mm OD ball bearings – replacement stock no. 171110
- Rotation: Either direction – The red or white output wire is positive for clockwise rotation from the shaft end.
- Speed: Zero to 5,000 rpm – generates at all speeds
Mounting: Four 6mm holes on the front or rear end caps, or by hose clamps on the magnet drum. - Weight: 1.5Kg (3.3lb) Shipping weight 1.9Kg (4lb), dimensions 150x150x300mm (6x6x12in).
- Resistance: Internal resistance 21 ohms. Inductance 40mH.
- Performance: See performance curves below
Generators are a non-returnable item
2.5A -10 minute run time
2A – 15 minute run time
1.5A – CONTINUOUS DUTY
DC Generator (443540): $149.00
Reviews
There are no reviews yet.